MSI Afterburner 4.6.2 Beta 1 download - Guru3D and MSI have been working hard on AfterBurner, today we release an updated this revision of Afterburner, this application successfully secured the leading position on graphics card utilities.MSI Afterburner is ultimate graphics card utility, developed by the Guru3D RivaTuner team. The Beta releases sometimes have an expiration limit, the stable and final build releases do not. We recommend using a final build. We have written a GeForce GTX series 1000 and newer overclocking guide right here as over time a number of things changed like Curve based tweaking as well as automated tweaking. Not just that, we have also updated RTSS, our statistics server that enables the overlay with MSI AfterBurner to offer DirectX 12 overlay support. Please read the full release notes for all changes (as there are quite a few of them). Have fun tweaking. Does your overlay not work anymore after an update? Please perform a full uninstall of RTSS and AfterBurner (with profiles removal) and then perform a CLEAN install of it.Download MSI Afterburner - https://mega.nz/#F!fxMQiARQ!Nsxe33NJ3HIIjzrmqqowTQVersion 4.6.2Added new MSI Steampunked skin by Drerex designImproved skin engine:Optimized skin rendering performance for skins using multiple overlapped animated indicatorsAdded position smoothing support to skinned indicatorsNow skinned applications can forcibly disable indicator animation if necessarySkin format reference guide has been updated to v1.8 to document these changes
Notes on Animated Steampunk Skin - 4.6.2 is optimized to improve performance of background animation rendering of new Steampunked skin, however, skin animation can still be rather performance hungry on old slow CPUs. So keep your eyes on CPU usage when using this skin, and if it is too high for you, you may try to do the following things to reduce it:Set skin composition mode to "layered with colorkey" (the fastest one) if you were using "layered with alpha" mode. Layered skin composition mode with alpha channel is the slowest one and the most CPU hungry due to using per-pixel transparencyReduce skin scaling factor in UI properties of MSI AB, higher skin scaling values cause higher CPU loadDisable animation completely, currently there is no dedicated option for it in GUI, however you can do it via editing the config and setting EnableAnimatedIndicators to 0
Version 4.6.1Added new MSI Touch of Modern skin by Drerex designAdded asynchronous dual fan control support for reference design NVIDIA GeForce RTX 20x0 series graphics cards. Please take a note that only 100% NVIDIA reference design dual fan control implementations are supported, third party proprietary asynchronous fan control solutions (e.g. EVGA iCX series asynchronous fans) are not supported and will not be supported in future versions. The following asynchronous fan control functionality is available:Added new “Synchronize fan speeds” button, which is allowing you to switch between synchronous and asynchronours fan control modes. Please take a note that new fan speed controls are available in v4 skins only, v3 and v2 skins are deprecated and no longer receive new functionalityWhen fan speeds synchronization is enabled, MSI Afterburner’s fan control functionality behaves exactly like in the previous version, i.e. both fans are running asynchronically in default hardware automatic fan speed control mode but become linked synchronically if you enable manual or software automatic fan speed control modeWhen fan speeds synchronization is disabled, you may select and adjust each fan speed independently. For software automatic fan speed control mode independent temperature curves are also adjustable for each fanImproved hardware monitoring module:Inverted hotkeys handling approach for multiple selected hardware monitoring graphs. Previously single graph settings mode was active by default, but you could apply some settings (e.g. “Show in On-Screen Display”) to multiple selected graphs with <Ctrl> hotkey modifier. Now such settings are applied to multiple selected graphs by default and <Ctrl> hotkey modifier is used to apply settings to single focused graphGroup operation notifier has been moved to hardware monitoring graph properties headerImproved backward compatibility with monitoring profiles created in the previous versions of application. It is no longer necessary to recreate the profiles having monitoring settings without On-Screen Display layoutIt is no longer necessary to click <Apply> button inside the On-Screen Display layout editor after changing current layout, now the changes are applied properly on closing the editorThe progress of saving multiple graphs’ settings is now displayed in the caption of the application’s property sheetOptimized handling of “dirty” flag for settings decreases saving time for multiple graph’s settings when using multiple subsequent group operationsAdded new “Hide attached monitoring panel” command to the context menu of hardware monitoring window. You may use it to toggle visibility of monitoring window when it is attached to the main application windowNow you may press <Ctrl> + <M> hotkeys to toggle monitoring window attachmentImproved voltage/frequency curve editor for both AMD and NVIDIA GPUs:Now you may hold <Shift>and press left mouse button on initial desired horizontal position in the editor window to begin fragment selection, then drag mouse cursor to desired final horizontal position and release left mouse button to select a fragment. The following functionality is available for selected fragments:You may double click the editor window to reset fragment selectionYou may adjust the offset for any point inside the selection with mouse cursor to apply the same offset simultaneously to all selected pointsYou may adjust the offset for any point inside the selection with keyboard cursor keys, <Enter> or <Shift>+<Enter>keys to apply the same offset or specify the same target frequency or voltage for all selected pointsImproved skin engine:Skin engine no longer crashes when switching between the skins having the same site with and without alpha channelAdded thumbless skinned slider controls supportAdded alpha path threshold support for skinned slider controlsImproved skin cross-compatibility layer:Extended list of applications supported by skin cross-compatibility layerVarious compatibility fixes for third party skins supported by cross-compatibility layerFixed issue with GUI stopping responding during adjusting skin scaling ratio on the fly in high DPI mode when skin composition mode was set to layered mode with alphaUpdated third party hardware database:Added new third party voltage control capable graphics cards to the databaseAdded new third party graphics cards with multichannel GPU, memory and VRM temperature sensors to the databaseRivaTuner Statistics Server has been upgraded to v7.2.2
Cast XMR - Highspeed CryptoNight (Monero/Bytecoin/DigitalNote/Loki/Haven/BitTube/Aeon) Miner for Radeon RX Vega and RX 470/480/560/570/580/590 GPUsFeatures- Full support for:CryptoNightV8 (CNv2)Monero (XMR)Graft (GRFT)Lethean (LTHN)Safex (SAFEX)CryptoNightV7 (CNv1)Quantum Resistant Ledger (QRL)DigitalNote (XDN)CryptoNight (Classic)Electroneum (ETN)Bytecoin (BCN)CryptoNightXTLStellite (XTL)CryptoNight-HeavyLoki (LOKI)Saronite (XRN)CryptoNightXHV-HeavyHaven (XHV)CryptoNightV7-LiteAeon (AEON)Turtlecoin (TRTL)CryptoNightTUBE-HeavyBitTube (TUBE)CryptoNight-FastMasari (MSR)CryptoNight-SuperFastFree Haven (XFH)
- Fastest miner for AMD Radeon RX Vega 64 GPUsabout 2000 CryptoNight/V7 Hashes/sabout 1850 CryptoNightV8 Hashes/s (10 min average)about 1635 CryptoNight-Heavy Hashes/sabout 4100 CryptoNight-Lite Hashes/s
- Fastest miner for AMD Radeon RX Vega56 GPUslmore then 2000 CryptoNight/V7 Hashes/sabout 1825 CryptoNightV8 Hashes/s (10 min average)about 1550 CryptoNight-Heavy Hashes/sabout 4260 CryptoNight-Lite Hashes/s
- Fastest miner for AMD Radeon Vega Frontier Edition GPUsabout 2100 CryptoNight/V7 Hashes/sabout 1930 CryptoNightV8 Hashes/s (10 min average)about 2120 CryptoNight-Heavy Hashes/sabout 4260 CryptoNight-Lite Hashes/s
- Optimized cores for Vega and Polaris based GPUs- Automatic driver version detection and setup recommendations- Multiple GPU support for upto 24 Vega GPUs- Monitor temperature and fan speed of each GPU- Full pool support- Nicehash support- Fast Job Switch option to minimize outdated shares- Rate Watchdog to monitor each GPU performance- Includes switch-radeon-gpu command line tool to restart GPUs, switch on/off HBCC, Compute Mode and Large Pages- Remote http access for statistics in JSON format- only 1% dev feeRequirements - Windows 8/8.1/10 64 bit or - Ubuntu Linux 16.04 or later - AMD Radeon RX Vega 56/64 GPU with at least 8GB RAM - or AMD Radeon RX Vega Frontier Edition with 16GB RAM - or AMD Radeon RX 470/RX 480/RX 560/RX 570/RX 580/RX 590 GPU with a least 4GB RAM - For up to 50% higher hash rates the Radeon Driver 18.5.1 or later has to be installedVersion HistoryCast XMR Version 1.8.0 (2019/02/21)
support for Radeon VII GPUs added
Cast XMR Version 1.7.1 (2019/01/26)
fix for Masari (MSR) to support uncle mining and the network upgrade to CryptoNightV8-Fast, now --algo=6 has to be used to mine Masari
Cast XMR Version 1.7.0 (2019/01/24)
support for CryptoNightV8-Fast (--algo=6) for mining Stellite (XTL). The previous CryptoNightXTL algo has been removedsupport for CryptoNight-Turtle (--algo=9) for the upcoming Turtlecoin (TRTL) PoW network upgrade (at block 1,200,000)Vega FE: option to turn --intensity up to 13 for "Fast" CryptoNight variants to gain 2% higher hash rates
Cast XMR Version 1.6.6 (2018/11/30)- support for RX 590 GPUs added- fixes for detecting Compute Mode on Polaris based GPUs- support for CryptoNight-SuperFast (--algo=11) for mining Free Haven Protocol (XFH)- updated switch-radeon-gpu to version 1.2.0, which includes bugfixes for newer versions of the AMD Radeon driversCast XMR Version 1.6.0 (2018/11/07)- Vega 56/64: 0.5 to 1% performance improvement on CryptoNightV8- Vega 56/64: 2 to 3% speed improvement on CryptoNight-Heavy variants (Loki, BitTube, Haven) - updated included switch-radeon-gpu to version 1.0.5- support for RX 560 GPUs addedCast XMR Version 1.5.0 (2018/9/27)- Support for the Monero V8 Network Upgrade which introduces a new CryptoNight variant CryptoNightV8 aka CNv2. The Monero V8 update is scheduled for 18th October. In case you are mining Monero make sure to update Cast XMR before that date. Also make sure that the algo for Monero is not explicitly set to CryptoNightV7 but set to auto detect with --algo=-1 to automatically switch from CryptoNightV7 to CryptoNightV8 when the upgrade is happening. Please also note that the CryptoNight V8 algo has added complexity which decreases the hashrate up to 7% for Vega GPUs.Cast XMR Version 1.4.0 (2018/8/28)- 3% performance improvement for CryptoNightTUBE-Heavy when mining BitTube (TUBE)- support for Festival Coin (FEST) upcoming update which introduces a new CryptoNight variant: CryptoNightFEST. Use --algo=9 to continue mining Festival Coin after the network update happened- subtle performance improvements- Tested with Radeon Adrenalin Driver 18.5.1Cast XMR Version 1.3.0 (2018/6/29)- Performance improvement for job switches with multiple GPUs- Support for BitTube (TUBE) V4 Pow Update which introduces the new algo CryptoNightTUBE-Heavy aka CN Saber. Stay on --algo=5 to switch automatically from CryptoNightIPBC-Lite to CryptoNightTUBE-Heavy when the update is happening (approx. 2nd July). Please note that the hash rate will drop as it is a switch from a Lite to a Heavy variant.Cast XMR Version 1.2.5 (2018/6/19)- Support for CryptoNight-Fast introduced with the Masari (MSR) update. Set --algo=8 to mine Masari (MSR). CryptoNight-Fast will produce higher hash rates than classic CryptoNight, typical hash rates are: - Vega64, 1025 Mhz MemClock: 3630 Hashes/s - Vega56, 945 Mhz MemClock: 3700 Hashes/s - VegaFE, 1025 Mhz MemClock: 3900 Hashes/s - RX 470/570, 2250 Mhz MemClock: 1550 Hashes/sCast XMR Version 1.2.0 (2018/6/12)- Fix for "unauthenticated shares" pool error- Support for the upcoming Haven (XHV) V3 update. In case you are mining Haven set --algo=7 now. Cast will then automatically switch to CryptoNightXHV-Heavy when the network update is happening.Cast XMR Version 1.1.5 (2018/6/7)- Fix for mixed up device order- Support for Stellite (XTL) V4 Update. Add --algo=6 in case you are mining Stellite. It will automatically switch to CryptoNightXTL when the network update is happening.- Stability fixesCast XMR Version 1.1.0 (2018/6/1)- All new --intensity option to specify the memory allocation in the range of 0 to 10, upto 12 for Vega Frontier Edition. The default setting will correspond with the settings of version 1.0 and are displayed at startup.- Vega Frontier 'Large Pages' support added, up to 30% higher hash rates for CryptoNight-Heavy, 5% increase for CryptoNight- Includes the switch-radeon-gpu command line tool to restart GPUs, switch on/off HBCC, Compute Mode and Large Pages- Nicehash supports now up to 24 GPUs- --maxmem option is deprecated, will now be mapped to an corresponding intensity setting- --forcecompute is deprecated, 'Compute Mode' of Polaris GPUs will be automatically detected. To overwrite use the --intensity option - Default mining algo changed to CryptoNightV7, to still mine CryptoNight Classic add --algo=0- Tested with Radeon Adrenalin Driver 18.4.1Cast XMR Version 1.0.0 (2018/4/24)- Support for Aeon (AEON) CryptoNight Lite variant set --algo=3 to mine- Support for Turtlecoin (TRTL) CryptoNightV7 Lite variant set --algo=4 to mine- Support for Interplanetary Broadcast Coin (IPBC) CryptoNight Lite IPBC variation set --algo=5 to mine- Up to 3% performance improvement with new option --maxmem to allocate the maximum memory of the card. For Vega cards the "HBCC Memory Segment" has to be disabled in the Radeon Settings to use the option. Disadvantage is a higher risk of hash rate drops when the --maxmem option is used.Cast XMR Version 0.9.6 (2018/04/17) - CryptoNight-Heavy fix for very low hash rates when HBCC Memory Segment is enabled - HBCC Memory Segment performance hint for Vega64 when mining CryptoNightV7 - Improvement for 4GB versions of RX 470/480/570/580 when mining CryptoNightV7Cast XMR Version 0.9.5 (2018/04/14) - 0.5% performance improvement for the CryptoNightV7 kernel - support for CryptoNight Heavy set --algo=2 to mine: - Sumokoin (SUMO) - Haven (XHV)Cast XMR Version 0.9.2 (2018/03/29) - Improvements for RX Vegas that achieve 99% the performance of the Blockchain Compute Beta driver with the latest standard Radeon Driver 18.3.4Cast XMR Version 0.9.1 (2018/03/22) - 0.5% overall performance improvement for Vega based GPUs - --ratewatchdog experimental option to monitor the hash rate, in case an occasional happening drop of the hash rate is detected the kernel will be resetted to restore the optimal hash rate - fully tested CryptoNight variant (CryptoNightV7) for the Monero V7 Network Upgrade PoW Change which is now scheduled for the 6th April. - In case you want to mine the Graft coin use the --algo=0 option, an automatic detection of the used CryptoNight variant is not possible for this coin. For all other known CryptoNight coins the hash variant seems to be detected correct - In case you are mining with nicehash.com or any other automatic coin switching pool that has the Graft coin in the mix the --algo=0 option is advised to prevent invalid shares on the Graft coin. Be aware to remove the option when the Monero V7 network upgrade is happpening otherwise it then will clash with mining Monero!Cast XMR Version 0.9.0 (2018/03/08) - support for the Monero V7 network upgrade. Read more about it here - the Monero PoW switch will be automatically detected, no restart of cast XMR is required. Only make sure to update cast XMR before the network upgrade is happening and that the used Monero pool supports the network upgrade - no decrase in hash rate for other currencies was introduced by the change - CryptoNightV7 will run at the same hash rate as CryptoNight - for any case there is the new --algo option to force which CryptoNight variant to use: - -1 = autodetect (default) - 0 = CryptoNight - 1 = CryptoNightV7 (Monero V7 network upgrade)Cast XMR Version 0.8.5 (2018/02/07) - 1% performance gain for Vega Frontier Edition with Blockchain driver (fastest GPU around) - 1% performance improvement with current stock driver (18.1.1) for RX Vega 56/64 (40% to go to reach Blockchain driver performance) - fix for random blocking console output - GPU now always logs with its device id not the order they are listed in the -G argument - --log option to log console output to a file - remote access includes CORS support in HTTP headerHow Tocast_xmr has a command line interface. For a minimal configuration run:cast_xmr -S [pool server] -u [username or wallet address]For a complete list of configuration options run:cast_xmr --helpDownload Cast XMR 1.8.0 for Windows (64bit)
Updated to 2.0.5 - 21.10.2018Ewbf [Equihash] - Ewbfautorun.batDstm [Equihash] - Dstmautorun.batClaymore [Equihash] - ClayZECautorun.batClaymore [CryptoNote] - ClayXMRautorun.batClaymore [NeoScrypt] - ClayNSautorun.batClaymore [Ethash] - ClayETHautorun.batEthminer [Ethash] - Ethrautorun.batCcminer [Multialgo] - CCautorun.batCast XMR [CryptoNote] - Castautorun.batPhoenix [Ethash] - Phnxautorun.bat
About:Hello, guys! FarmWatchBot (Miner autorestart, autorun, watchdog) by Acrefawn (me).Opensource CMD/BAT file. If you found or corrected an error, please contact me immediately!Together we can work out any bugs as well as add features and functionality to further automate the process of mining.
First of all I have to say, this script was developed for me and my friends. We did this to make the mining process easy and stable. This script helps monitor the mining process for errors and takes some corrective measures depending on the issue that arise from the miner or hardware. After much time of running this script personally to ensure its stability, I decided to share this script with the community.
Functionality is fully brought to the mind. Everything works without problems or errors and have been tested over and over. I’d personally like to thank those who spent their time and helped me to make this script better. You helped worked for the common cause! The script is in active development. Feature requests, suggested changes and error corrections are welcomed by everyone.
If you use this script, find it helpful, and it has stabilized your mining productivity then please donate. This is an open source project and you are not required to pay for it. When I ask for donations I’m not necessarily referring to monetary donations exclusively. You can donate with your SHARES, LIKES and FEEDBACK as well. Thank you very much!
Ignore SmartScreen, you can open .bat for editing and check that it is not a virus.Windows 10 Pro x64 Creators Update or higher (May not work on others).All programs for overclocking must be installed in their default directories.Use path, folders, .bat file name in English, without special symbols and spaces.The presence of miners .log file. The .bat script works using the data in your .log file. Make sure you added special option to the config.ini file. If you experience difficulties with the log file or this script, please delete config.ini file and run through steps 2 and 3 of the instructions again. This values already exist in default config.ini, just not remove them.It is advised that you disable “User Account Control”.Right click on the window of CMD prompt, then select “Properties” and remove the tick for “Quick Edit”.Powershell WMF 5.1 (for premium Windows 7 users).Use 24 hours format. (OS date/time settings).I highly do not recommend modifications to the code by yourself. If you feel the need to make changes then please contact me with suggestions so that I can help. Any changes resulting with errors that need my technical assistance will not be done for free.
Download .bat file from in [CMD] FarmWatchBot.rarPlease do not rename it.Move .bat file to the folder with the miner, double click the .bat file. A new config.ini file will be created with default settings at first run.Close .bat CMD window and open the created config.ini file for editing. Configure settings in this file according to your needs using notepad. The configuration file is always at a higher priority than the variables inside the script.Add a SHORTCUT to .bat file in your Startup folder (WIN+R shell:startup).Run .bat file if you are satisfied with settings in the above mentioned files and enjoy the automation!
Fine tuning of the mining process by using of config.ini file.Activity monitoring of GPU OC software such as MSI Afterburner, GIGABYTE Xtreme Gaming Engine, ASUS GPU Tweak II, EVGA Precision X, AORUS Gaming Engine, Palit Thunder Masterand auto restart of it, if necessary.Ability to auto enable specified Overclock Profiles for MSI Afterburner.Average hashrate monitoring and control. Information about average hashrate, last total hashrate, current temperature, current pool server hourly reports in Telegram.The ability to run and activity control another miner or any other programs (Minergate, TeamViewer, Storj etc).Control of the active GPUs number, based on settings in config.ini or on last loaded amount.Ability to periodically reboot the miner or computer with specified time intervals.Reboots the PC after critical errors. This script uses an error list which includes errors that require the PC to be restarted in order to resolve the issue.Monitors internet availability. Restarts PC in regular time intervals if connection has not restored.Supports an extra back up pool server switch over, when main server is inaccessible.GPU overheat control.Checking the presence of the necessary files. Sorts logs into the Logs folder, with the ability to clean it. Maintain your logs in the autorun.log file. Errors, warnings, messages regarding successful start. Screenshot of the desktop in case errors occur and sort them into the Screenshots folder.
Cast XMR - Highspeed CryptoNight (Monero/Bytecoin/DigitalNote/Loki/Haven/BitTube/Aeon) Miner for Radeon RX Vega and RX 470/480/560/570/580 GPUs
Download Cast XMR for Windows x64
Full support for:
Quantum Resistant Ledger (QRL)
Masari (MSR)Fastest miner for AMD Radeon RX Vega 64 GPUs
about 2000 CryptoNight/V7 Hashes/s
about 1850 CryptoNightV8 Hashes/s (10 min average)
about 1635 CryptoNight-Heavy Hashes/s
about 4100 CryptoNight-Lite Hashes/sFastest miner for AMD Radeon RX Vega56 GPUsl
more then 2000 CryptoNight/V7 Hashes/s
about 1825 CryptoNightV8 Hashes/s (10 min average)
about 1550 CryptoNight-Heavy Hashes/s
about 4260 CryptoNight-Lite Hashes/sFastest miner for AMD Radeon Vega Frontier Edition GPUs
about 2100 CryptoNight/V7 Hashes/s
about 1930 CryptoNightV8 Hashes/s (10 min average)
about 2120 CryptoNight-Heavy Hashes/s
about 4260 CryptoNight-Lite Hashes/sOptimized cores for Vega and Polaris based GPUsAutomatic driver version detection and setup recommendationsMultiple GPU support for upto 24 Vega GPUsMonitor temperature and fan speed of each GPUFull pool supportNicehash supportFast Job Switch option to minimize outdated sharesRate Watchdog to monitor each GPU performanceIncludes command line tool to restart GPUs, switch on/off HBCC, Compute Mode and Large PagesRemote http access for statistics in JSON formatonly 1% dev fee
Windows 8/8.1/10 64 bitAMD Radeon RX Vega 56/64 GPU with at least 8GB RAMor AMD Radeon RX Vega Frontier Edition with 16GB RAMor AMD Radeon RX 470/RX 480/RX 560/RX 570/RX 580 GPU with a least 4GB RAMFor up to 50% higher hash rates or later has to be installed
Cast XMR Version 1.6.0 (2018/11/07)
Vega 56/64: 0.5 to 1% performance improvement on CryptoNightV8Vega 56/64: 2 to 3% speed improvement on CryptoNight-Heavy variants (Loki, BitTube, Haven)updated included switch-radeon-gpu to version 1.0.5support for RX 560 GPUs added
Cast XMR Version 1.5.0 (2018/9/27)
Support for the which introduces a new CryptoNight variant CryptoNightV8 aka CNv2. The Monero V8 update is scheduled for 18th October. In case you are mining Monero make sure to update Cast XMR before that date. Also make sure that the algo for Monero is not explicitly set to CryptoNightV7 but set to auto detect with --algo=-1 to automatically switch from CryptoNightV7 to CryptoNightV8 when the upgrade is happening. Please also note that the CryptoNight V8 algo has added complexity which decreases the hashrate up to 7% for Vega GPUs.
Cast XMR Version 1.2.5 (2018/6/19)
Support for CryptoNight-Fast introduced with the Massari update. Set --algo=8 to mine Masari (MSR). CryptoNight-Fast will produce higher hash rates than classic CryptoNight, typical hash rates are:Vega64, 1025 Mhz MemClock: 3630 Hashes/sVega56, 945 Mhz MemClock: 3700 Hashes/sVegaFE, 1025 Mhz MemClock: 3900 Hashes/sRX 470/570, 2250 Mhz MemClock: 1550 Hashes/s
Cast XMR Version 1.2.0 (2018/6/12)
Fix for “unauthenticated shares” pool errorSupport for the upcoming Haven coin V3 update. In case you are mining Haven set --algo=7 now. Cast will then automatically switch to CryptoNightXHV-Heavy when the network update is happening.
Cast XMR Version 1.1.5 (2018/6/7)
Fix for mixed up device orderSupport for XTL coin V4 Update. Add --algo=6 in case you are mining Stellite. It will automatically switch to CryptoNightXTL when the network update is happening.Stability fixes
Cast XMR Version 1.1.0 (2018/6/1)
All new --intensity option to specify the memory allocation in the range of 0 to 10, upto 12 for Vega Frontier Edition. The default setting will correspond with the settings of version 1.0 and are displayed at startup.Vega Frontier ‘Large Pages’ support added, up to 30% higher hash rates for CryptoNight-Heavy, 5% increase for CryptoNightIncludes the radeon-gpu command line tool to restart GPUs, switch on/off HBCC, Compute Mode and Large PagesNicehash supports now up to 24 GPUs–maxmem option is deprecated, will now be mapped to an corresponding intensity setting–forcecompute is deprecated, ‘Compute Mode’ of Polaris GPUs will be automatically detected. To overwrite use the --intensity optionDefault mining algo changed to CryptoNightV7, to still mine CryptoNight Classic add --algo=0Tested with Radeon Adrenalin Driver 18.4.1
Cast XMR Version 1.0.0 (2018/4/24)
Support for Aeon (AEON) CryptoNight Lite variant set --algo=3 to mineSupport for Turtlecoin (TRTL) CryptoNightV7 Lite variant set --algo=4 to mineSupport for Interplanetary Broadcast Coin (IPBC) CryptoNight Lite IPBC variation set --algo=5 to mineUp to 3% performance improvement with new option --maxmem to allocate the maximum memory of the card. For Vega cards the “HBCC Memory Segment” has to be disabled in the Radeon Settings to use the option. Disadvantage is a higher risk of hash rate drops when the --maxmem option is used.
Cast XMR Version 0.9.6 (2018/04/17)
CryptoNight-Heavy fix for very low hash rates when HBCC Memory Segment is enabledHBCC Memory Segment performance hint for Vega64 when mining CryptoNightV7Improvement for 4GB versions of RX 470/480/570/580 when mining CryptoNightV7
Cast XMR Version 0.9.5 (2018/04/14)
0.5% performance improvement for the CryptoNightV7 kernelsupport for CryptoNight Heavy set --algo=2 to mine:Sumokoin (SUMO)Haven (XHV)
Cast XMR Version 0.4 (2017/10/13)
performance optimizations result in 1 - 2% higher hash ratesreduced dev fee to 1.5%
Cast XMR Version 0.3 (2017/10/10)
performance optimizations result in 5 - 10% higher hash ratesbreaking the 2 KHashes/s barrier with working overclocking settings for RX Vega 64 and RX Vega 56
Cast XMR Version 0.2 (2017/09/27)
performance improvement result in 1% higher hashratesImproved support for RX Vega 56 (now goes faster then a Vega 64 !?)Detection if Blockchain driver is installedFix for Sikka and Intense pools
Cast XMR Version 0.1 (2017/09/22)